canvas-app

Create or Edit a Canvas App

Create or edit a Power Apps canvas app for the following requirements:

$ARGUMENTS

Overview

This skill handles both creating and editing canvas apps through a unified workflow. It syncs the current app state to detect whether the app has existing content, then routes accordingly:

• CREATE mode — the app is empty or has no meaningful content; a new app is generated from scratch using a preferences wizard and parallel screen builders.
• EDIT mode (simple) — the app has existing content and the requested changes are small; edits are applied inline without planning agents.
• EDIT mode (complex) — the app has existing content and the requested changes are substantial; a planner designs the changes and parallel screen builders execute them.

Two specialist agents are used for planned work:

1. canvas-app-planner — discovers available controls, APIs, and data sources; gathers control property definitions; and writes the shared plan document (canvas-app-plan.md) and App.pa.yaml. Receives the approved plan from the skill.
2. canvas-screen-builder — writes or modifies exactly one screen's YAML; multiple builders run in parallel after the plan is approved

You (the skill) coordinate the agents, detect mode, design and present the plan for user approval, and own the compilation + error-fixing loop after all screens are written.

Phase 0 — Create App Folder

Before syncing or editing, create a subfolder to contain the app's YAML files:

1. Extract the app name or a 2–4 word summary from $ARGUMENTS
2. Convert to kebab-case (e.g., "Expense Tracker" → expense-tracker, "my travel planner" → my-travel-planner)
3. Create the folder using Bash: mkdir -p <folder-name>
4. Resolve its absolute path — this is the working directory for all subsequent phases

Pass this absolute path as the working directory in every agent prompt below.

Phase 1 — Sync

Call the sync_canvas MCP tool targeting the working directory. This pulls the current app state from the coauthoring session into local .pa.yaml files. Only proceed after sync_canvas completes successfully.

Phase 2 — Detect Mode

After sync_canvas completes, read the synced .pa.yaml files and check whether the app has meaningful content. An app is considered empty if:

• No .pa.yaml files were written, or
• The only files present contain no screens, or
• Every screen present has no controls (only bare screen-level YAML with no children), or
• Every screen's controls consist solely of containers (e.g., GroupContainer) with no leaf controls inside them

If the app is empty → CREATE mode. Proceed to Phase 3.

If the app has meaningful content → EDIT mode. Skip Phase 3 and proceed to Phase 4.

Phase 3 — Gather Preferences (CREATE mode only)

Use AskUserQuestion to collect design preferences that cannot be reliably inferred from $ARGUMENTS. Parse $ARGUMENTS first to determine which questions to skip — but a short request like "visitor check-in app" or "expense tracker" leaves most preferences unspecified and you MUST ask.

Call AskUserQuestion with the applicable questions from the table below (include only the ones that need answers):

Rules:

1. If the user provides a screenshot (either attached with their original request or via the wizard), examine it to extract structural cues (layout, navigation pattern) and visual cues (color palette, density, typography). Use these to inform the aesthetic direction — do not ask the aesthetic question separately.
2. If all questions are already answered by $ARGUMENTS and any attached images, skip the wizard entirely and proceed directly to Phase 5.
3. Ask all applicable questions in a single AskUserQuestion call — do not ask them one at a time.
4. Store all answers for use in the planner prompt below.

Target users & device influence design decisions:

• Desktop users → data-dense layouts, tables, keyboard-friendly, multi-column. ManualLayout acceptable for pixel-perfect dashboards.
• Tablet users → touch-friendly targets, medium density, AutoLayout (responsive) so the app adapts to landscape/portrait.
• Phone users → large touch targets, single-column, simplified navigation, AutoLayout (responsive), minimal typing.
• Multi-device / unknown → AutoLayout (responsive) required.

After collecting preferences, proceed to Phase 5 (Plan).

Phase 4 — Assess Complexity (EDIT mode only)

Read all synced .pa.yaml files. Based on $ARGUMENTS and the current app state, determine whether this is a simple or complex edit:

Simple — all of the following are true:

• Changes affect ≤ 2 controls or properties
• Changes are confined to ≤ 1 screen
• No new screens are being added
• No new data sources or connectors are needed
• No structural layout changes (e.g., not changing ManualLayout to AutoLayout)

Examples: change a button color, update label text, fix a formula, adjust a control size.

Complex — any of the following are true:

• Changes span multiple screens
• One or more new screens need to be created
• New data sources or connectors are required
• Structural layout changes are involved
• Significant visual redesign of a screen

Examples: add a settings screen, redesign the home screen layout, integrate a new connector, change the navigation flow across the app.

• If simple: proceed to Phase 4a.
• If complex: proceed to Phase 5 (Plan).

Phase 4a — Simple: Direct Edit

Read ${PLUGIN_ROOT}/references/TechnicalGuide.md before making changes.

Apply the changes directly:

1. Edit the relevant .pa.yaml files with the required changes, following conventions from TechnicalGuide.md.

2. Validate by calling compile_canvas on the working directory after making changes. On failure, read the errors, fix with Edit, and re-compile. Iterate until clean.

3. Present a brief summary:

   Edit complete. [1-2 sentence description of what was changed.] Compiled clean after [N] pass(es).

Stop here. The simple edit path is complete — do not continue to Phase 5 or beyond.

Phase 5 — Plan

You (the skill) own plan design and user approval. After approval, invoke the canvas-app-planner agent to discover resources, gather control definitions, and write the plan document.

Step 5.1 — Read Reference Documents

Read both reference documents before designing the plan:

• ${PLUGIN_ROOT}/references/TechnicalGuide.md
• ${PLUGIN_ROOT}/references/DesignGuide.md

Internalize both. These govern every design decision you will make.

Step 5.2 — Design the Plan

CREATE mode

Based on the user preferences from Phase 3 and the user's requirements, reason through:

• How many screens are needed and what each does
• Which controls will drive each screen's layout
• What aesthetic direction fits the app's purpose
• How data will flow (data sources, collections, or mock data)
• Layout strategy — follow the layout decision rules in TechnicalGuide.md

EDIT mode

Read all .pa.yaml files in the working directory (you may have already read them in Phase 4). Based on the current app state and the user's edit requirements, reason through:

• Which screens need to be modified and what specific changes are needed
• Whether any new screens need to be created
• How changes can be made while preserving the existing app's aesthetic and layout consistency
• Any new controls, data sources, or variables required

Step 5.3 — Present Plan for Approval

Enter plan mode (EnterPlanMode) and present the plan.

CREATE mode

## Canvas App Plan

### Screens ([N] total)

| Screen | File | Purpose | Key Controls |
|--------|------|---------|--------------|
| [Name] | [Name].pa.yaml | [one-line description] | [2-3 controls] |

### Data Strategy
[How data will be loaded — data sources used, or "collections/mock data"]

### Aesthetic Direction
[e.g., "Bold & editorial — high-contrast dark background, accent RGBA(255,90,60,1), card-based layout, strong typographic hierarchy"]

EDIT mode

## Canvas Edit Plan

### Screens to Modify ([N] total)

| Screen | File | Summary of Changes |
|--------|------|--------------------|

Both modes

Then call ExitPlanMode to request user approval.

• If approved: proceed to Step 5.4.
• If changes requested: revise the plan and re-enter plan mode with the updated version.

Step 5.4 — Invoke Planner Agent

After approval, invoke the canvas-app-planner agent using the Task tool. The agent will discover available resources, gather control property definitions, write App.pa.yaml (CREATE only), and write canvas-app-plan.md.

Pass a prompt that includes the approved plan. The agent does NOT redesign the plan or interact with the user — it discovers resources, enriches the plan with control definitions, and writes the output files.

CREATE mode

Example prompt:

You are the canvas-app-planner agent. Write the plan document for a Canvas App.

Mode: CREATE

Requirements: [paste $ARGUMENTS here]

Approved plan: [paste the full plan you presented in Step 5.3 — screens, data strategy, aesthetic direction, all RGBA values]

User preferences (from wizard):

• Target users & device: [answer]
• Aesthetic direction: [answer]
• Features: [answer]
• Reference image: [observations, or "none provided"]

Working directory: [absolute path from Phase 0] Plugin root: ${PLUGIN_ROOT}

Follow the instructions in your agent file. Discover resources, gather control definitions, write App.pa.yaml and canvas-app-plan.md to the working directory. Return the screen list and plan document path when complete.

EDIT mode (complex)

Example prompt:

You are the canvas-app-planner agent. Write the plan document for edits to a Canvas App.

Mode: EDIT

Edit requirements: [paste $ARGUMENTS here]

Approved plan: [paste the full plan you presented in Step 5.3 — screens to modify/add, approach, all RGBA values]

Current app state:

• Palette: [exact RGBA values extracted from existing files]
• Variables: [variable names found in existing files]
• Layout strategy: [AutoLayout / ManualLayout as found in existing files]
• Screens: [list of existing screens and their key controls]

Working directory: [absolute working directory path] Plugin root: ${PLUGIN_ROOT} Synced files: [list of .pa.yaml filenames]

Follow the instructions in your agent file. Discover resources for new controls, gather control definitions, write canvas-app-plan.md to the working directory. Return the list of screens and the plan document path when complete.

Wait for the planner to finish. Do not proceed to Phase 6 until the planner task completes successfully.

Phase 6 — Build / Edit

After the planner completes, read canvas-app-plan.md from the working directory.

Extract the screen list from the ## Screens table — collect each screen name, its target file name, and its action (Create or Modify).

Invoke one canvas-screen-builder agent per screen. Fire all invocations in a single message (parallel execution) — do not wait for one screen to finish before starting the next.

For each screen, pass a prompt that includes:

• Screen name (e.g., "Home")
• Target file name (e.g., "Home.pa.yaml")
• Action: "Create" (new screen) or "Modify" (existing screen being edited)
• Absolute path to canvas-app-plan.md
• Working directory

Example prompt per screen:

You are the canvas-screen-builder agent. [Create / Modify] the [Screen Name] screen.

• Action: [Create / Modify]
• Target file: [ScreenName].pa.yaml
• Plan document: [absolute path to canvas-app-plan.md]
• Working directory: [absolute path from Phase 0]

Follow the instructions in your agent file. [Write / Edit] [ScreenName].pa.yaml and return your result when done. Do not call compile_canvas — validation is handled by the skill.

Wait for all screen-builder tasks to complete before proceeding.

Phase 7 — Validate and Fix

After all screen-builders have finished writing their files, call compile_canvas on the working directory.

On success: Proceed to Phase 8.

On failure: Read every error in the output. Errors will reference specific files and line numbers. For each error:

1. Read the referenced .pa.yaml file
2. Fix the error using Edit
3. After fixing all errors from this pass, call compile_canvas again

Repeat until compile_canvas reports no errors. Do not give up after a single fix attempt — iterate until the entire directory compiles clean.

Track how many compile_canvas passes were needed.

Phase 8 — Summary

Delete canvas-app-plan.md from the working directory using Bash: rm <working-directory>/canvas-app-plan.md

Present a final summary based on the mode:

CREATE mode:

App generation complete.

Screen	File	Status
[Screen Name]	[filename].pa.yaml	Created

Compiled clean after [N] pass(es). | Screens: [N] | Data: [source or collections]

EDIT mode (complex):

Edit complete.

Action	Screen	File	Status
[Create / Modify]	[Screen Name]	[filename].pa.yaml	Done

Compiled clean after [N] pass(es).

If any errors remain after exhausting fixes, report them explicitly so the user knows what needs manual attention.